Connect with us

Environment

StreetScooter provides electric vans and charging infrastructure for Amazon

Amazon has ordered 40 StreetScooter WORK Box electric vans which will be deployed at its distribution center in Munich Daglfing.

Published

on

StreetScooter provides electric vans and charging infrastructure for Amazon. Image: DHL
Listen to the story (FreightComms AudioPost)

Amazon has ordered 40 StreetScooter WORK Box electric vans which will be deployed at its distribution center in Munich Daglfing. Complementing the vehicle order, StreetScooter has also installed 60 charging stations at the Amazon site.

“We were very delighted that Amazon turned to StreetScooter for a climate-friendly delivery solution as well as our proven charging infrastructure expertise,” said Jörg Sommer, CEO of StreetScooter GmbH.

“Amazon is committed to achieving the Paris agreement targets ten years ahead of schedule – in 2040 instead of 2050 – so we are collaborating with a number of different partners developing new technologies and helping promote a carbon-neutral economy,” explained Adam Elman, Senior Lead Sustainability, Amazon Europe. “We look forward to working with StreetScooter and using their expertise to add additional electric vehicles and charging stations to our network and achieve carbon-neutral delivery operations.”

StreetScooter’s “Made in Germany” e-vans not only proved their ability to handle the heavy demands of last-mile delivery, but scored points for economy and ROI as well. According to Jörg Sommer, StreetScooter performs better in total cost of ownership after just a few years as compared to conventional combustion-engine vehicles.

Environment

World’s first zero-emission top handles performing well at Port of Los Angeles

Published

on

World's first zero-emission top handles performing well at Port of Los Angeles. Image: Port of Los Angeles
Listen to the story (FreightComms AudioPost)

The world’s first zero-emissions top handlers, unveiled last fall as part of a pre-commercial demonstration project at the Port of Los Angeles, are now being used in daily operations at the Everport Container Terminal.

“We are pleased with performance results that we are receiving from drivers, mechanics and Everport management as the equipment is tested daily in real-world conditions,” said Port of Los Angeles Executive Director Gene Seroka.  “We are doing everything possible to advance commercially feasible solutions to meet our goal of transitioning all cargo-handling equipment to zero emissions by 2030.”

The two battery-electric top handlers were designed and built in the U.S. by Taylor Machine Works, Inc. a leading heavy-duty equipment manufacturer and the largest supplier of top handlers in service at the Port. Also known as top picks, top handlers are off-road vehicles with an overhead boom for loading containers weighing up to 100,000 pounds onto trucks and trains, unloading them, and stacking them on terminals between pickups and deliveries.

The top handlers run on a one-megawatt battery designed to operate for up to 18 hours between charges. Each top handler has a data logger for tracking hours of operation, charging frequency, energy usage and other performance indicators. Additionally, drivers and mechanics are providing input on the maneuverability, noise level and safety of the equipment.

The battery-electric top handlers are a key component of the Port’s $7.7 million Everport Advanced Cargo-Handling Demonstration Project. The California Energy Commission is supporting the large-scale zero-emissions technology project with a $4.5 million sustainability grant.

The Everport demonstration is one of 16 projects in which the Port is either the lead agency or a participant working with multiple partners to test near-zero emissions and zero-emissions engines, emissions control technology, and alternative fueling and charging stations. In addition to the battery-electric top handlers, the projects include testing ultra-low NOx renewable natural gas equipment and fully battery-electric fuel cell heavy-duty trucks; battery-electric forklifts, yard tractors, and rubber-tired gantry cranes; and emissions control equipment on large ships and harbor craft.

Eliminating tailpipe emissions from cargo-handling equipment is essential to achieving the Port’s larger goal of reducing greenhouse gases from all port-related sources. Port targets call for reducing GHGs 40% below 1990 levels by 2030 and 80% below 1990 levels by 2050.

The Port of Los Angeles remains open with all terminals operational during the COVID-19 pandemic. North America’s leading seaport by container volume and cargo value, the Port of Los Angeles facilitated $276 billion in trade during 2019. San Pedro Bay port complex operations and commerce facilitate one in nine jobs in the five-county Southern California region.

 

Continue Reading

Container Shipping Lines

Evergreen joins the Ship Recycling Transparency Initiative

Published

on

Evergreen joins the Ship Recycling Transparency Initiative. Image: Wikimedia/ Alpsdake
Listen to the story (FreightComms AudioPost)

Evergreen Marine Corporation (Taiwan) Ltd. has become a signatory to the Ship Recycling Transparency Initiative in order to share its aged vessels’ green recycling policy. The move is part of Evergreen’s avowed commitment to plan a completely sustainable life cycle for its vessels from design, construction, operation and ultimately to decommissioning.

The SRTI, hosted by the Sustainable Shipping Initiative, is an online platform via which members report information on their ship recycling policies and activities against a set of predefined disclosure criteria.

In the interest of transparency, Evergreen and other participating shipowners can share their approach to this critical component of environmental and socially responsible ship operations. Cargo owners and financial stakeholders, in turn will have access to this information in order to make their own informed decisions.

In announcing its decision to join SRTI, Evergreen said “We have had a long-standing commitment to ‘Clean Oceans’. Embodied in this goal is a mission to ensure responsible and sustainable operations wherever they touch the environment, whether at sea or on land, and to care for the people we employ and the communities we serve.”

When planning its current fleet renewal strategy therefore, Evergreen not only requires strict recycling standards for those vessels being disposed of, but also incorporates state-of-the-art design into its newbuildings so as to minimize the impact of container shipping operations both on marine life, on port communities and on humanity worldwide.

In this regard Evergreen invests in measures that go beyond environmental regulations, for instance, the new 12,000-TEU class F-type vessels, of which the 1st in the series is already in service network since March of this year, are equipped with a Selective Catalytic Reduction reactor system.

Such technology ensures that the vessels meet MARPOL nitrogen oxide emission Tier III standards, which is above the current Tier II requirements. In addition, Evergreen voluntarily ensure that all newbuildings and the ships already in service, no matter on which service trade they will be deployed, will be provided an Inventory of Hazardous Materials Part 1 for Class approval and SoC for certification.

Such consideration of the environmental impact of a vessel’s operation throughout its life-cycle is the driving force behind the latest SRTI move. “When a vessel is decommissioned and recycling is planned, not only can valuable and reusable resources be recovered but potentially dangerous waste and pollutants must be processed properly.” Evergreen goes on to say. “Recycling operations with the highest standards of safety available must be utilized. “We are therefore pleased to share our recycling policies by joining SRTI and helping lead a growing industry initiative to demand more responsible ship recycling in the future.”

In a statement welcoming Evergreen, Andrew Stephens, Executive Director of the Sustainable Shipping Initiative said, “Evergreen Marine joins a growing SRTI family that includes like-minded shipowners who are holding themselves to account before key stakeholders, including clients, investors and the wider public. This includes an increasingly diverse range of stakeholders engaging on the topics of data and transparency, circularity, and the role of financial stakeholders in sustainable and responsible ship recycling in the absence of global regulation.”

True to both its name and the corporate philosophy established by group founder and chairman Dr. Y.F. Chang, Evergreen recognizes its ecological obligations and will continue to maintain the best possible care in sustaining an ‘ever green’ global environment.

Continue Reading

Environment

Ship recycling in Bangladesh leaps forward with third phase of key project signed

Published

on

Ship recycling in Bangladesh leaps forward with third phase of key project signed. IMO
Listen to the story (FreightComms AudioPost)

The third phase of an IMO-implemented project to enhance safe and environmentally sound ship recycling in Bangladesh has been given the go-ahead, with Norway committing approximately US$1.5 million (14 million Norwegian Kroner) to support improved ship recycling in Bangladesh.

The agreement between IMO and the Government of Norway to support Phase III of the project on Safe and Environmentally Sound Ship Recycling in Bangladesh (SENSREC) was signed on 24 July 2020. This will pave the way for Bangladesh to move forward on its path towards becoming a party to the IMO Hong Kong Convention, the treaty that will set global standards for safe and environmentally-sound ship recycling.

The Agreement follows the successful implementation of Phase I (2015-17) and Phase II (2018 – 2020) of the SENSREC Project, both mainly funded by Norway. With the additional funding, Phase III of the project will be implemented over 18 months, starting from November 2020.

SENSREC Phase III will focus on improving ship recycling standards in compliance with the Hong Kong Convention and enhancing capacity building for the Government of Bangladesh on legislation and knowledge management. Specific technical assistance will be provided to the Government of Bangladesh to establish a facility for treatment, storage and disposal of hazardous wastes. There will also be a focus on evaluating the impact of Covid-19 on the ship recycling industry in Bangladesh.

The Ambassador of Norway to Bangladesh, Ms Sidsel Bleken, said that the SENSREC Project had already achieved significant progress, thanks to the commitment of the Government authorities as well as the ship-recycling industry of Bangladesh.

“Norway is pleased to extend its support to Bangladesh and our thanks go to IMO for their important role in this Project. Through IMO, we will continue to support the authorities, the industry, and other stakeholders in strengthening their efforts to develop Bangladesh’s ship-recycling industry and the country’s economy. We hope to see more yards complying with the requirements of the Hong Kong Convention, so that Bangladesh can be ready to accede to the Convention in the soonest possible time,” Her Excellency Ms Bleken said.

The Agreement was signed by the Her Excellency Ms. Bleken and IMO Secretary-General Mr. Kitack Lim.

Thanking the Government of Norway for their generous contribution, Mr. Lim said, “The continuation of this project will greatly enhance national capacities for Bangladesh for safe and environmentally sound recycling of ships. The success of this Phase III of the project will be seen in the crucial technical assistance role that will support the goals of Bangladesh to establish a facility for treatment, storage and disposal of hazardous wastes and ultimately support its aim to accede to the Hong Kong Convention.”

Continue Reading

Popular

Copyright © 2017-18 | FreightComms | Made with ♥ in Singapore